大片网站久久,欧美性感美女一区二区,欧美日韩不卡视频

BYD electric reach forklift pictures-

Own weight Automatically guide the weight of the electric truck with battery

5, Ltd

Pay attention to the protection of exposed parts

Companies in northern regions should pay more attention to this

The safe use of electric forklift batteries is an important issue

Another manifestation is that the discharge capacity will decrease significantly

Cars and other eight series of products

When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

Battery capacity: 80V/700Ah 5

, Ltd

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

In today's warehouses, four- or five-meter-high through-type shelves are a common configuration

BYD electric reach forklift pictures- Circuit system 1

Lifting is achieved by repeatedly moving the hydraulic cylinder up and down by manpower to lift the goods

Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match The most familiar industrial transporter is the forklift

The controller self-diagnosis system displays the fault code through the handheld unit, making it more convenient to solve the fault

Each type of pallet has different specifications: 1*1

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

Factory operators are basically able to operate the equipment skillfully, but rarely can they solve the faults in the use of the equipment in a timely manner

Most of the batteries used in forklifts are lead-acid batteries, but they have gradually been replaced by lithium batteries

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

Later, my country's forklift manufacturer invented the Little King Kong through lightweight design, which rapidly reduced the cost of electric transport trucks Lifting control Turn on the key switch and operate the handle in the indicated direction to raise or lower the fork

BYD electric reach forklift pictures-

Do you think this kind of micro-innovation is difficult? And it must be developed when there is market demand

This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance

When entering or leaving the work site or driving, pay attention to whether there are obstacles above Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection 1

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint There is no need to add water or acid, which improves the office environment, increases staff satisfaction, and is beneficial to staff stability; 5

The electric transporter manufacturer tells you that when the speed is adjusted to the rabbit speed, it is suitable for use in wide places with few people and suitable for driving longer distances

High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info