亚洲精品一卡二卡三卡四卡,亚洲精品乱码久久久久久,日韩欧美综合一区

What are the maintenance items of BYD warehouse trucks?-

Full AC control system 5

The minimum turning radius is crucial for calculating the width of the channel that the electric forklift can pass through

The application of wet braking has greatly improved the reliability of the drive axle

Lithium batteries are a type of battery that uses lithium or lithium alloys as negative electrode materials and non-aqueous electrolyte solutions

While pressing the handle, use your thumbs to rotate the travel button forward to move the electric pallet truck forward

High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

Stable and reliable

Electric forklifts are more practical and recommended for purchase, but the batteries need to be well maintained and can be used for a relatively long time

Many smaller manufacturers do not have such high requirements for forklifts, so they can choose relatively small electric forklift equipment, which can not only be carried with the vehicle, but also light in weight and occupies a smaller area

The two sets of gantry are connected through the connecting channel steel of the two sets of slides, so that the slides are fixedly connected to achieve mechanical synchronization between the gantry

3 The price is less than a quarter of Linde and half of Heli2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable Battery intelligent management is an electronic component for real-time monitoring, automatic balancing, and intelligent battery charging Electric trucks save time, effort, energy, cost and efficient operation

What are the maintenance items of BYD warehouse trucks?-

Regardless of the type or model of electric pallet truck, there are always some signs before serious problems occur

Considering the needs of warehouse high-rise operations and the height of the warehouse, the lifting height of the forklift should be appropriately considered from the standard configuration of 3

The safety distance is generally 200mm

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

The second is three-dimensional warehousing based on shuttle vehicles, which is mainly used in scenarios with medium and low shelves and strong product homogeneity

The two sets of gantry are connected through the connecting channel steel of the two sets of slides, so that the slides are fixedly connected to achieve mechanical synchronization between the gantry

Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

Pay attention to the working voltage of the ammeter

Before continuing to operate, the direction selection switch must be restored to the middle position

The altitude shall not exceed 1,200 meters

Impact of temperature difference inside and outside the cold storage Cold storage forklifts need to work alternately between low temperature and normal temperature environments

At the same time, in order to enhance the driver's sense of security during use, guardrails, intelligent recognition functions of pedal positions and three-speed design protection are specially installed to improve driving safety from multiple dimensions

What are the maintenance items of BYD warehouse trucks?-

During operation, the driving speed can be reasonably controlled to meet different usage rhythms

During operation, the amount and weight of the operation must be controlled according to the correct operating specifications and operating sequence

The most prominent advantage of AC motors is that they do not have carbon brushes and are not subject to current restrictions like DC motors

Pallet is a very important cargo-carrying tool used with electric transport trucks

The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button Hangcha Group, together with Contemporary Amperex Technology Co

The electric transport truck manufacturer will tell us its use and function

The appearance and structure of the products were basically the same, and some even had the same color

Use a grinding wheel to grind out the weld bevel at the crack

It mainly includes rail electric flatbed trucks, hydraulic press update platform trucks, AGV electric trucks, rechargeable battery delivery flatbed trucks, low-voltage electric flatbed trucks, and roll trucks

The second is to refer to the manufacturer's positioning

For a time, hydrogen fuel forklifts have become a new hot spot

What are the functions of BYD forklifts? What are the functions of BYD forklifts? I believe everyone knows a little about forklifts

The future trend is clear The industry generally believes that with the country and society increasing environmental protection standards for corporate production and the change in economic development model, forklift electrification is a major trend in the future

The forklift editor learned that the current short-term rental price of an ordinary forklift is about 300-500 yuan a day

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info