日韩大片免费观看视频播放,国产精品av一区二区,亚洲亚洲免费

BYD lithium battery palletizing forklift brand-

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

The above data refers to the "China Forklift Manufacturing Industry Production and Sales Demand Forecast and Transformation and Upgrading Analysis Report" by the Forward-looking Industry Research Institute

Brushless DC motors are suitable for industrial new energy electric vehicles powered by batteries (or other DC power supplies), such as electric forklifts, electric rail-mounted flatbed trucks, rail-driven electric trucks, large tractors, etc

There are many details about the use of electric transport trucks

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

0 tons, and is generally divided into empty container forklifts, loaded container forklifts, and container reach stackers

The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick

The vehicle body is easy to disassemble and assemble

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

Below, the editor will briefly tell you how to prevent corrosion and rust on new energy forklifts

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation

BYD lithium battery palletizing forklift brand-

Consider the needs of the standard forklift first

The manual trucks produced by electric truck manufacturers also have these special advantages: thickened high-carbon steel plates have stronger load-bearing capacity and longer life; upgraded rubber-coated handles make operation more comfortable and labor-saving; high-quality casters are used, which are quiet and wear-resistant; and automatically welded forks are not easy to deform and are stronger

In 2020, benefiting from the rapid recovery of domestic industrial manufacturing from the epidemic, the overall production and sales of the forklift industry increased significantly

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

Parking (1) Release the direction select switch When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle

The lifting, lowering and turning of the forklift are driven by the hydraulic system

Air cooling must not contain flammable and explosive gases

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds

The power manager can regularly monitor the battery status

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

BYD lithium battery palletizing forklift brand- Therefore, if the budget permits, you can consider using a forklift with solid tires

The rapid development of the logistics industry requires forklifts with short charging time, long service time, stable performance, high-intensity operation, and high degree of automation and intelligence

There are specification restrictions for the use of electric pallet trucks and pallets

※ The brake function is normal

It can be said that the three types of vehicles have the most models

First, the altitude of the electric forklift workplace should not exceed 1200m

0 to 6

Many customers don't know that the main mechanism of metal corrosion is the conversion of raw metal into metal oxides, which causes structural parts or components to rust, damage, or even become irreparable and scrapped

The skyrocketing order size has put higher demands on warehousing and logistics

Turn on the emergency power off switch

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

If it is lower than the standard value, it indicates that the charging voltage is too low

In 2020, the sales volume of electric forklifts in China's forklift manufacturing industry reached 410,300 units, a year-on-year increase of 37

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info