国产成人精品福利,亚洲人成精品久久久久,成人影院网站

BYD forklift operation video- An electric forklift with excellent quality and simple operation is also very important They are efficient equipment for mechanized loading and unloading, stacking and short-distance transportation

② Raise the fork to the top position to check whether the hydraulic oil in the hydraulic system is sufficient

BYD's new energy forklifts have zero emissions, high efficiency, and low comprehensive use costs, making them the first choice for logistics and handling equipment for many companies, forming a good industry reputation and brand effect

Starting the electric pallet truck: 1

After stopping using the electric pallet truck, turn off the key switch and remove the key

Reversing 1 Turn on the key switch of the electric pallet truck and check whether there is enough power on the power display

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

Professional maintenance and repair can ensure the effective utilization of cold storage forklifts, reduce downtime and extend the service life

2 Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

BYD forklift operation video-

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

Reduce the damage of transported items and improve the success rate of products

Mastering these methods during daily use can shorten the time for equipment failure repair and reduce maintenance costs

The operation is simple, safe and reliable Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir

Forklift work safety requirements: 1

in various factories and mines

The price is less than a quarter of Linde and half of Heli

When a vehicle breaks down in the cold storage, it must be moved out of the cold storage as soon as possible and repaired in the buffer zone or maintenance area

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

When using electric transport trucks, please pay attention to the following matters: 1

In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

So, what problems are prone to occur with the plate? What are the symptoms? What are the reasons? Next, the truck manufacturer will tell you about it

BYD forklift operation video-

When the gantry is retracted, the width of the operating channel is generally 2

As a promoter of new energy forklifts, BYD forklifts provide green and safe pharmaceutical logistics with their unique design, flexible operation, stable performance and comprehensive after-sales service system

The greater the output of the same product, the lower the purchase cost of a single component will be

It is already very difficult to find a traditional internal combustion forklift on the market

Adjust the height of the forks so that they are about 100mm-200mm from the ground

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed The electrical parts and connectors must be arranged inside, and protective covers can also be added

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

The vehicle can be easily pushed under the base of the cargo box, and then the chassis is raised by hydraulics to lift the goods, and the goods can be dragged to move

, which mainly develops and produces power battery systems (lithium-ion) for off-road vehicles

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

The lifting device also relies on the motor to drive the hydraulic pump to push the hydraulic oil in the hydraulic cylinder to achieve lifting and lowering From the current situation, the technical development direction of electric forklifts mainly includes the following aspects: (1) Lithium electrification Driven by multiple factors such as the acceleration of forklift electrification, the continuous decline in the price of power lithium batteries, and increasingly strict supervision of the lead-acid industry, the lithium electrification of forklifts has become an obvious trend in the development of the industry

What advantages do lithium batteries have over storage batteries in electric forklifts? The use of lithium batteries in electric cars is affected by factors such as the popularity of charging equipment, the limited range of driving, and the wide and uncontrollable travel area

Manual forklift

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info