亚洲欧美aⅴ...,1024精品久久久久久久久,国产一区不卡精品

BYD Food Factory Special Forklift Maintenance Regulations Contents-

The technical threshold is relatively low and the unit price is also relatively low

Pay attention to the protection of exposed parts The second is to refer to the manufacturer's positioning Its unit is millimeters It has low cost, but low storage efficiency and poor scenario applicability

Or you can directly call the forklift rental phone number to rent

Finally, the fork is retracted and the loading platform falls back to the low position The valve components and seals need to be replaced if they are worn and aged 2

(2) Turn the key switch to the on position

When driving outdoors, the speed should not exceed 10km/h

In order to avoid many after-sales problems that affect work efficiency, it is best to choose batteries produced by manufacturers with good reputation and credibility, so that the quality is more guaranteed

5Minimum turning radius

The high-strength and compact frame design ensures the service life of the vehicle, while ensuring the strength of the frame without increasing the vehicle's own weight

Is only horizontal transportation required, or is there stacking, picking, or sorting? Are the items being transported special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the length of the forks, and the number of mast levels

BYD Food Factory Special Forklift Maintenance Regulations Contents-

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

With the development of the economy and the improvement of environmental protection requirements, electric forklifts have developed rapidly, and market sales have increased year by year

Only when all the equipment of the electric flatbed truck is functioning normally can the flatbed truck be operated

Reversing 1

in various factories and mines

If the battery is damaged or the plate is irreversibly sulfated, it is recommended to return it to the factory for repair to avoid improper repair and safety hazards

Everyone was focusing on production, cost, price, channels, and sales, but the investment in the introduction of high-tech talents and product research and development was obviously insufficient

Due to its zero pollution and low noise, it is widely used in indoor operations and other industries with high environmental requirements Regardless of whether the battery has obvious temperature changes during the charging process, the electrolyte will not be turbid, which extends the service life

3 When choosing, we must understand the approximate price range of the equipment

In this way, the forklift can be lifted slightly to a certain height after picking up the goods and then retracted, ensuring the stability of the forklift during operation

Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

BYD Food Factory Special Forklift Maintenance Regulations Contents- 4 4 It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground (2) Serialization The most obvious manifestation of forklift serialization is the variety

Battery compatibility: Batteries of electric forklifts of various brands are interchangeable, so the original batteries can still be used, allowing the components to maintain a longer service life

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

Check the handbrake and footbrake; 3 Overall, economical electric walk-behind warehouse forklifts account for a large proportion, which is mainly due to multiple factors such as cost control and machine replacement in the downstream demand market

Counterbalanced forklift AGV is mainly used for raw material distribution on production lines, transportation of semi-finished products and finished products, and palletizing in warehouses and docks, replacing manual labor for simple and frequent operations, thereby improving work efficiency

Hydraulic control The raising and lowering handles on the body panel control the raising and lowering functions

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

Long service life

There are specification restrictions for the use of electric pallet trucks and pallets

This product breaks through the concept of traditional battery forklifts, combines the advantages of internal combustion forklifts and electric forklifts, has a low center of gravity, compact structure, comfortable driving, green and environmentally friendly, can be flexibly operated in a small space, and its main performance indicators have reached the international advanced level

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info