中文字幕av一区二区三区高,亚洲网站免费,精品欧美国产

What are the requirements for BYD pallet handling forklift maintenance?-

When buying a 3-ton electric forklift, we should know the height of the shelf

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate

Charging voltage is too low Phenomenon: The charging indicator light flashes or the ammeter swings around zero

The auxiliary wheels are usually screwed on and can be replaced by loosening the screws

It will be much easier to drive after mastering it

However, with the substantial increase in domestic electric forklift sales in recent years, domestic supporting parts have continuously made technological breakthroughs

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

The most commonly used is lead-acid battery, which requires regular inspection of the battery fluid level

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

The basic operation of an electric pallet truck is to raise and lower the forks, and to move the vehicle forward and backward Lithium batteries are a type of battery that uses lithium or lithium alloys as negative electrode materials and non-aqueous electrolyte solutions

In addition to Zhongli, companies such as Noli, Ningbo Ruyi, and BYD Forklift have also made good progress in the electric walk-behind warehouse truck market segment, and are constantly seeking innovative breakthroughs in structural design optimization, load capacity, ergonomics, and easy maintenance

What are the requirements for BYD pallet handling forklift maintenance?-

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

It is forbidden to park the counterbalanced forklift in the moving area, and it is strictly forbidden to stand on the forks or pallets of the counterbalanced electric forklift

With the development of the economy and the improvement of environmental protection requirements, electric forklifts have developed rapidly, and market sales have increased year by year

How to operate a BYD forklift? Operating a BYD forklift is a technical job that requires certain knowledge and skills Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

Some worked hard on the appearance, some improved the workmanship, some strengthened the performance, and some worked hard on the cost

The turning radius of a three-wheel forklift is much smaller

They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

For specific classification, please refer to the previous two articles: [Forklift Knowledge] Forklift Classification (V): Class III Electric Transporter [Forklift Knowledge] Forklift Classification (VI): Class III Electric Stacker The third category vehicles are different from the second category vehicles

It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

Starting, stopping or changing movement should be slow, as sudden movement may cause danger

What are the requirements for BYD pallet handling forklift maintenance?-

A heater should be installed in the cab

When a vehicle breaks down in the cold storage, it must be moved out of the cold storage as soon as possible and repaired in the buffer zone or maintenance area

(3) Parking: Stop the electric pallet truck by releasing the travel direction switch and returning it to the neutral position The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

Key switch The function of this switch is to control the connection and disconnection of the circuit

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully

The intensive use of through-type shelves has made forklifts a standard feature in warehousing, and only they can be competent for safe, fast, and green pickup

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

Clean the hydraulic oil tank, change the hydraulic oil and clean the filter

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info